Mitel MIVOICE OFFICE 400 User Manual page 71

KT lines can only be configured on the top soft keys and the keys of the
expansion key module.
Note: Your system administrator can configure up to 12 line keys (including per-
sonal and KT lines) for you, but you cannot have more than two simultane-
ous connections.
Answering a call on the KT line key
You are being called on one or more KT line keys. The KT line key(s) flash
quickly. You want to answer a call on a KT line key.
If you want to answer a call on another KT line key first, press this KT line
key in order to pick up the call. If you pick up the handset without pressing
a KT line key, you will be connected to the highest priority KT line.
Note: If an incoming call meets a busy KT line, the call is forwarded to the other
available KT line. Only if no more KT lines are free, your caller hears a
busy tone.
Pick up the handset.
➔
Connection to the KT line with the highest priority.
Or:
1. Press KT line key.
➔
KT line is selected.
2. Pick up the handset.
➔
Connection to the selected KT line.
Initiating a call via a KT line key
You want to make a call via a KT line key.
You can call via any free KT line key. Each KT line is associated with a call
distribution element (CDE) number. This means that, by phoning, you
transmit the call number associated with the active KT line key.
Charges are accrued separately for each KT line key.
Mitel 6873 SIP
eud-1744/1.4 – R5.0 HF2 – 10.2017
Phoning
71