Mitel MIVOICE OFFICE 400 User Manual page 83

Notes: • The PIN that you have changed locally on your phone cannot be dis-
played or overwritten over the Self Service Portal. Therefore, only con-
figure your PIN via the Self Service Portal of the MiVoice Office 400
communication server.
• Please note that your personal PIN is valid for all your phones in the
one number user concept (see chapter "One number user concept",
page 8).
Enter the display text for the idle state
You want to change the text displayed by your phone in the idle state.
The display text shown in the idle state on your phone is configured using
the Self Service Portal. For more information about the Self Service Portal,
please refer to "MiVoice Office 400 Self Service Portal", page 9.
Local IP settings
Your phone saves phone-specific data such as IP address or memory
space. The input of this data is password-protected; it can therefore only
be carried out by your system administrator. You can however call up the
data.
Calling up the phone status:
Press the Option key.
Press Status.
➔
Information is displayed by pressing the settings.
Calling up the system menu:
Press the function key for Menu.
Press
➔
Settings are displayed.
Restart phone
You want to restart your phone. You have to restart your phone after the
following actions:
• Installing a new language package.
• Updating the newly selected language.
Mitel 6873 SIP
eud-1744/1.4 – R5.0 HF2 – 10.2017
Software Version.
Personalizing your phone
83