Mitel MIVOICE OFFICE 400 User Manual page 38

Phoning
Menu
Permanent
Per call
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 92).
Notes: • Your call number can only be hidden if you select an external call num-
ber.
• This feature depends on the range of services offered by your provider.
Activating/deactivating calling line identification restriction permanently:
Press function key
➔
Function is activated/deactivated, LED on the function key is switched on/off.
You phone number is hidden in all outgoing calls.
Activating CLIR per call:
1. Press function key
2. Enter the call number and press the
➔
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the
same phone.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold,
flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key or the
➔
The call is active again.
38
Description
The call number is never displayed.
Call number should only be restricted for certain calls.
This function must be activated before dialling the call
number.
Hide
Hide
Call number is dialled and your own number is not displayed to the called
party.
number.
number.
Select
is displayed and the LED of the line key
softkey.
Pick up softkey.
eud-1744/1.4 – R5.0 HF2 – 10.2017
Mitel 6873 SIP