Mitel MIVOICE OFFICE 400 User Manual page 111

Room configuration
In the
following entries:
• Room
Occupied.
• Cleaning
and
• Guest
• Call
Print
• Wake-up
for daily repetition of the wake-up call as an additional option.
• Notification: Enable or disable notification for the guest.
• Permission
missions defined by your system administrator. Contact your system
administrator for more information about alternative telephony permis-
sions.
• Surcharge
charge values. Ask your system administrator for the values with which
the surcharge calculator is configured.
• Room-to-room call
On, the guest can call to another room. Your system administrator
defines the standard permission in the communication system. You can
manually modify this setting during check-in or at any time during a
guest's stay.
• Hotline: You can type in a call number here. This call number is dialled
automatically once the guest lifts the room telephone handset. Usually
this is the call number of the reception.
• Direct call
guest through this number.
Modify room settings
Press a room key to get the detailed room-configuration settings of the room.
Modify the settings as required.
Or,
Press the
Mitel 6873 SIP
eud-1744/1.4 – R5.0 HF2 – 10.2017
Room configuration
state: Occupancy status of the room. The room is either Free, or
state: The status is either
inspected.
name: Type in the name of the guest.
charges: Provides an overview of the telephone charges. You can
the bill, Reset it, or do Both.
call: Activate wake-up call for the time you set. You can select
set: Use this setting to allow the alternative telephony per-
calculator: Select a surcharge calculator to display the sur-
permission: If you enable this setting by selecting
number: The external callers can connect directly to the
Menu key.
of a certain room you can view and modify the
Not cleaned, Cleaned, or
Reception phone
Cleaned
111