Upnp Setup - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
Use Program 10-37 : UPnP Setup to set the UPnP (Universal Plug and Play) options for SIP trunks.
Program
10 Input Data
Item
No.
01 UPnP Mode
02 Retry Time
Conditions
None
Feature Cross Reference
None
2-38
Program 10 : System Configuration Setup
Item Input Data
0 = Disable
1 = Enable
0, 60 ~ 3600
(1 ~ 59 cannot be input)

10-37 : UPnP Setup

Description
If the system controls the SIP phone
through the NAT Router this program
should be 1: Enable.
Router must support UPnP.
Set interval time to re-check the Router for
the WAN IP address.
When this set as 0 it will not retry.
Program 10 : System Configuration Setup
ISSUE 2.0
Default
0
60