Sip Trunk Registration Information Setup - NEC SL2100 Programming Manual

ISSUE 2.0
Program 10 : System Configuration Setup

10-36 : SIP Trunk Registration Information Setup

Level:
IN
Description
Use Program 10-36 : SIP Trunk Registration Information Setup to set the SIP trunk registration
information.
Input Data
Profile
Register ID
Item Item
No.
01 Registration
02 User ID
03 Authentication User
ID
04 Authentication Pass-
word
Conditions
None
Feature Cross Reference
None
Programming Manual
Input Data
0 = Disable This setting determines if the SIP trunk in-
1 = Enable formation is registered.
Up to 32 Characters User ID in the SIP Invite Setup message.
When assigning the Use it for outbound caller ID information if
User ID, the ID may con- no information is assigned in commands
tain only alpha charac- 21-17, 21-19, 15-16, 14-12 and 10-36. A
ters. (A space and/or call cannot be completed across the span
special characters are if there is no outbound CID info. The rea-
not allowed in the User son for this is: the from and display portion
ID field). of the invite message would be blank, and
(ex. : UserID@Host- it would not know where the call originated
Name.DomainName) from.
Up to 64 Characters
Up to 32 Characters
1 ~ 6
0 ~ 31
Description
SL2100
Program
10
Default
0
No Setting
No Setting
No Setting
2-37