NEC SL2100 Programming Manual page 222

SL2100
Item
No.
16 Call Redirect
17 Department Group
Trunk-to-Trunk Trans-
fer (Each Telephone
Group Transfer)
18 Transfer Recall on
Receiving CoS
Program
19 Hold/Extended Park
20
20 No Callback
21 Restriction for Tan-
dem Trunking on
Hang Up
22 Restricted Unsuper-
vised Conference
23 CAR/VE Call Forward
Set/Cancel
24 Trunk Park Hold
Mode
25 Transfer Park Call
26 Station Park Hold
mode
27 Call Park Search
28 Both Ring Enhance-
ment
30 Disable Call FWD In-
dication on LCD
31 Transfer to Remote
Conference
Conditions
None
Feature Cross Reference
• Class of Service
2-198
Item Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Allow
1 = Deny
0 = Off
1 = On
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold (On)
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Normal
1 = Enhanced
0 = Off
1 = On
0 = Off
1 = On
Description
Turns off or on a multiline terminal user
ability to transfer a call to a predefined
destination (such as an operator, voice
mail, or another extension) without an-
swering the call.
Turns off or on an extension user ability to
set Trunk-to-Trunk Forwarding for a De-
partment Group.
Allow (0)/Deny (1) unanswered Transfer-
red calls from recalling the originating ex-
tension.
Determine if an extension Class of Service
should allow either a normal or extended
Park.
Turns off or on an extension to receive
callbacks.
Allow (0) or Deny (1) an extension user
ability to set up a tandem/conference call
automatically when they hang up.
Allow (0) or Deny (1) an extension ability
to initiate an unsupervised conference.
Turn on or off an extension ability to set or
cancel call forwarding for a virtual exten-
sion.
Set the hold type when a trunk call is put
on hold by an extension.
Turn off or on an extension ability to trans-
fer a parked call.
When set to 1, Call FWD setting is not
shown on the terminal LCD.
Use this option to enable or disable an ex-
tensions ability to transfer a call to a re-
mote conference.
Program 20 : System Option Setup
ISSUE 2.0
Default
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1