Automatic Night Service Patterns - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
SA
Description
Use Program 12-02 : Automatic Night Service Patterns to define the daily pattern of the Automatic
Mode Switching. Each Mode Group has 10 patterns. These patterns are used in Programs 12-03 and
12-04. The daily pattern consists of 20 timer Settings.
Input Data
Night Mode Group Number
Time Schedule Pattern No.
Set Time Number
Item Item
No.
01 Start Time
02 End Time
03 Night Mode
Example :
Time Pattern 1
0 :0 0
M o d e 3
(m id n ig h t)
To make the above schedule, it is necessary to set the data as follows:
Time setting 01 :
Time setting 02 :
Time setting 03 :
Time setting 04 :
Time setting 05 :
Time setting 06 :
Time setting 07 :
Programming Manual
Program 12 : Night Mode Setup

12-02 : Automatic Night Service Patterns

Input Data
0000 ~ 2359 Per Night Service Group, Per Time Pat-
tern, assign a starting time pattern. The
first time pattern must start at 00:00 (mid-
night).
0000 ~ 2359 Per Night Service Group, Per Time Pat-
tern, assign an ending time pattern. Each
used time pattern must have a starting and
ending time assigned.
1 ~ 8 = Night Modes 1 ~
8
9 :0 0 1 2 :0 0 1 3 :0 0
M o d e 1 M o d e 4 M o d e 1
(d a y) (re st) (d a y)
00 : 00 to 09 : 00
09 : 00 to 12 : 00
12 : 00 to 13 : 00
13 : 00 to 17 : 00
17 : 00 to 18 : 00
18 : 00 to 22 : 00
22 : 00 to 00 : 00
1 ~ 4
01 ~ 10
01 ~ 20
Description
1 7 :0 0 1 8 :0 0 2 2 :0 0
M o d e 4 M o d e 2 M o d e 3
(re st) (n ig h t) (m id n ig h t)
Mode 3 (midnight)
Mode 1 (day)
Mode 4 (rest)
Mode 1 (day)
Mode 4 (rest)
Mode 2 (night)
Mode 3 (midnight)
SL2100
Program
Default
Refer below
Refer below
Refer below
0 :0 0
2-97
12