NEC SL2100 Programming Manual page 159

ISSUE 2.0
Item Item
No.
03 Internal Incom-
ing Ring Tone
04 Redial (Speed Di-
al) Control
05 Transfer Key Op-
eration Mode
06 Hold Key Operat-
ing Mode
07 Automatic Hold
for CO Lines
08 Automatic
Handsfree
10 Ringing Line
Preference for
Trunk Calls
11 Callback Auto-
matic Answer
Programming Manual
Input Data
1 = High (2W Digital, IP Use this option to set the tone
Multiline Terminal) (pitch) of the incoming extension call
2 = Medium (2W Digi- ring for the extension port you are
tal, IP Multiline Termi- programming. Also refer to Program
nal) 15-08.
3 = Low (2W Digital, IP
Multiline Terminal)
4 = Melody 1 (2W Digi-
tal, IP Multiline Termi-
nal)
5 = Melody 2 (2W Digi-
tal, IP Multiline Termi-
nal)
6 = Melody 3 (2W Digi-
tal, IP Multiline Termi-
nal)
7 = Melody 4 (2W Digi-
tal, IP Multiline Termi-
nal)
8 = Melody 5 (2W Digi-
tal, IP Multiline Termi-
nal)
0 = Common and Indi- Use this option to control the func-
vidual Speed Dialing tion of the extension Redial key
1 = Group Speed Dial- when used with Speed Dialing. The
ing Redial key can access either the
Common/Individual or Group Speed
Dialing numbers.
0 = Transfer Use this option to set the operating
1 = Serial Call (call mode of the extension Transfer key.
back) The keys can be for Call Transfer,
2 = Hook (Flash) Serial Calling or Flash. When select-
ing the Flash option (selection 2),
refer also to Program 81-01-14.
0 = Normal Hold Use this option to set the function of
1 = Exclusive Hold the Multiline Hold key. The Hold key
can activate normal Hold or Exclu-
sive Hold.
0 = Hold When talking on a CO call and an-
1 = Disconnect (Cut) other CO line key is pressed, the
original trunk is placed on Hold (0)
or Disconnected (1).
0 = Preselect Use this option to set whether
1 = One-Touch (Auto- pressing a key access a One-Touch
matic Handsfree) Key or if it preselects the key.
0 = Idle (Off) Use this option to select between
1 = Ringing (On) Idle and Ringing Line Preference for
trunk calls.
0 = Off Use this option to enable or disable
1 = On automatic answer of calls recalling
to a station. For example, if a Trans-
fer Recall or Hold Recall is ringing
back to a station, the following hap-
pens:
If Program 15-02-11 is enabled, the
station will automatically answer the
recall when it goes off-hook. If Pro-
gram 15-02-11 is disabled, a station
does not automatically answer the
recall when it goes off-hook. The
user must first press the line ap-
pearance of the recalling call or
press the answer key.
Description Default
SL2100
Related
Program
8
Program
15
0
0
0
1
1
1
1
2-135