One-Touch Keys - NEC SL2100 Programming Manual

SL2100
Level:
SB
Description
Use Program 15-14 : One-Touch Keys to define the One-Touch key data for each multiline terminal.
Program
For each Wireless telephone to use the Transfer When Out of Range feature, enter the destination
15 number (up to 36 digits) and name (up to 12 characters) into One-Touch bin 10. Make sure to add any
required trunk access codes for outside numbers. If this bin information is changed either through
15-14-01 or through user programming, the destination for the transferred calls is also changed.
Input Data
Item
No.
01 Dial Data
02 Name
Conditions
None
Feature Cross Reference
None
2-164
Program 15 : Extension, Basic Setup
Extension Number
Key Number
Item Input Data
Maximum of 36 digits (0
~ 9, , #, @, P, R)
*
@ = Wait for Answer Su-
pervision - ISDN trunks
only
P = Pause - Analog
Trunk Only
R = Hook flash - Analog
Trunk Only
Maximum of 12 charac-
ters

15-14 : One-Touch Keys

Maximum eight digits
01 ~ 10
Description
If PRG 15-02-60 is set to a (0) then the
stations personal speed dial entries are
programmed here.
Per key number (1 ~ 10) assign the tele-
phone number that is to be called when
the bin is accessed.
Per key number (1 ~ 10) assign a name to
be used when searching through the direc-
tory.
If a name is not assigned for a speed dial
bin the speed dial entry will not be listed in
the directory.
Program 15 : Extension, Basic Setup
ISSUE 2.0
Default
No Setting
No Setting