Inmail Station Mailbox Options - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
IN
Description
Use Program 47-02 : InMail Station Mailbox Options to set up a station/extension mailbox. Station
mailboxes are automatically assigned as Subscriber Mailboxes. Normally, InMail Station Mailbox
numbers 1 ~ 64 should correspond to extensions 101-164.
Station Mailboxes are one of three mailbox categories: Station, Routing, or Master. You can also set up
Master Mailboxes as Subscriber Mailboxes.
Input Data
Station Mailbox Number
Item Item
No.
01 Mailbox Type
02 Mailbox Number
03 Number of Messages
04 Message Playback
Order
Programming Manual

47-02 : InMail Station Mailbox Options

Input Data
0 = None Use this option to enable or disable the
1 = Personal mailbox. An extension mailbox is not ac-
2 = Group cessible when it is disabled (even though
its stored messages and configuration are
retained in memory.) If disabled, a user
pressing Message initiates a remote logon
and is asked to enter their mailbox num-
ber. A voice prompt then announces: "That
mailbox does not exist."
To make programming easier, consider as-
sociating a mailbox number with a station
port. For example, mailbox 1 could corre-
spond to port 1, which in turn corresponds
to extension 101.
Up to eight digits Use this option to select the extension
number associated with the mailbox you
are programming. Normally, mailbox 1
should use Mailbox Number 101, mailbox
2 should use Mailbox Number 201, 101
etc.
To make programming easier, consider as-
sociating a mailbox number with a station
port. For example, mailbox 1 could corre-
spond to port 1, which in turn corresponds
to extension 101.
0 ~ 99 messages Use this option to set the maximum num-
To conserve storage ber of messages that can be left in the
space, enter 0 for all un- Subscriber Mailbox. If a caller tries to
used mailboxes. leave a message after this limit is reached,
they hear : "That mailbox is full." InMail
then hangs up.
0 (FIFO = first-in/ first- Use this option to set the Subscriber Mail-
out, or oldest messages box message playback order. When a sub-
first). scriber listens to their messages, InMail
1 (LIFO = last-in/ first- can play the oldest messages first (first-in/
out, or newest messages first-out, or FIFO), or the newest messag-
first) es first (last-in/first-out, or LIFO).
Program 47 : InMail
1 ~ 128
Description
SL2100
Program
47
Default
Mailbox 1 ~ 64 =
1
Mailbox 65 ~ 256
= 0
Mailbox 1 = 101
Mailbox 2 ~ 64 =
102 ~ 164
Mailbox 65 ~
256= No Setting
Mailbox 1 = 99
Mailbox 2 ~ = 20
0
2-447