Sip Server Information Setup - NEC SL2100 Programming Manual

ISSUE 2.0
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup for outbound/
inbound. The 10-29 commands are not used in non-registration mode.
If entries are made in Program 10-29-xx for a SIP Server and the SIP Server is then removed or not used,
the entries in Program 10-29-xx must be set back to their default settings. Even if 10-29-01 is set to 0 (off),
the system still checks the settings in the remaining 10-29 programs.
Input Data
Profile
Item Item
No.
01 Outbound Default
Proxy
02 Inbound Default
Proxy
03 Default Proxy IP Ad-
dress
04 Default Proxy Port
Number
05 Registrar Mode
06 Registrar IP Address
07 Registrar Port Num-
ber
11 Registrar Domain
Name
12 Proxy Domain Name
13 Proxy Host Name
Programming Manual

10-29 : SIP Server Information Setup

Input Data
0 = Off This sets whether the SIP message is al-
1 = On ways sent through the Default Proxy.
0 = Off Need to be registered in registration mode.
1 = On This sets whether the SIP message is al-
ways received through the Default Proxy.
0.0.0.0 ~ This is optional and used if the provider
126.255.255.254 gives you a proxy address that is different
128.0.0.1 ~ than the registration address. If the provid-
191.255.255.254 er is using domain names instead of IP ad-
192.0.0.1 ~ dresses, leave this at default.
223.255.255.254
0 ~ 65535 The port number of the Default Proxy is
set.
0 = None The mode registered in the registration
1 = Manual server is set.
0.0.0.0 ~ IP address of the SIP registration server is
126.255.255.254 set.
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
0 ~ 65535 The port number of the SIP registration
server is set.
Up to 128 Characters This sets the domain name of the registra-
tion server.
Up to 64 Characters This specifies the domain name of the SIP
server.
Up to 48 Characters This specifies the host name of the SIP
(SIP Profile:1-2) server.
1 ~ 6
Description
SL2100
Program
10
Default
0
0
0.0.0.0
5060
0
0.0.0.0
5060
No Setting
No Setting
No Setting
2-33