Universal Answer/Auto Answer - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
Use Program 23-03 : Universal Answer/Auto Answer to assign trunk routes (set in Program 14-06)
Program
to extensions for Universal Answer. If the call ringing the paging system is in an extension assigned
route, the user can dial the Universal Answer code (#0) to pick up the call.
23
You can also use this program to let an extension user automatically answer trunk calls that ring other
extensions (not their own). When the user lifts the handset, they automatically answer the ringing calls
based on Trunk Group Routing programming (defined in Program 14-06). The extension user ringing
calls, however, always have priority over calls ringing other co-worker extensions. Refer to the Line
Preference feature in the SL2100 Features and Specifications Manual for more information.
Make one entry for each Night Service mode.
Input Data
Item
No.
01 Route Table
Number
Conditions
None
Feature Cross Reference
• Line Preference
• Night Service
2-310
Program 23 : Answer Features Setup

23-03 : Universal Answer/Auto Answer

Extension Number
Day/Night Mode
Item Input Data
0 ~ 50
Maximum eight digits
Description
Use this program to let an extension
user automatically answer trunk
calls that ring other extensions.
When the user lifts the handset,
they automatically answer the ring-
ing calls based on Trunk Group
Routing programming (defined in
Program 14-06).
Program 23 : Answer Features Setup
ISSUE 2.0
1 ~ 8
Default Related
Program
0 14-06