Registration Of Standard Sip Terminal - NEC SL2100 Programming Manual

ISSUE 2.0
Program 15 : Extension, Basic Setup

15-24 : Registration of Standard SIP Terminal

Level:
IN
Description
Use Program 15-24 : Registration of Standard SIP Terminal to register data in the standard SIP
terminal where Register is not used.
Input Data
Extension Number
Item Item
No.
01 Using IP Address
02 Call Procedure Port
03 Registration Setting
when REGISTER isn't
used
04 Transport Protocol
Conditions
None
Feature Cross Reference
None
Programming Manual
Input Data
0.0.0.0 ~ IP Address of the standard SIP terminal
255.255.255.255 that is used as the SIP extension. When
Program 15-24-03 is set to 1, this Program
cannot be changed from 0.0.0.0 (except
using PCProgramming).
1 ~ 65535 Call procedure port of the standard SIP
terminal that is used as SIP extension.
0 = Disable Enables or disables the Registration meth-
1 = Enable od. An error will occur if Program 15-24-01
is 0.0.0.0 and this Program is set to 1 (ex-
cept using PCProgramming).
0 = UDP This program sets the transport protocol.
1 = TCP
Up to eight digits
Description
SL2100
Program
15
Default
0.0.0.0
5060
0
0
2-171