Panasonic MINAS A4P Series Instruction Manual page 90

How to Use the Console
• Jog operation
The motor can be operated by the jog operation.
When you keep on pressing
When you keep on pressing
The rotation speed can be set by 16.Pr40 (jog speed [low]).
When you press
When you keep on pressing
When you keep on pressing
The rotation speed can be set by 16.Pr41 (jog speed [high]).
When you press
* Definition of positive or negative direction of rotation depends on the setting of 16.Pr50
(operating direction setting).
* If "Error" is shown, it may be caused by any of the factors below.
• The servo turns off.
• Operation by I/O etc.
• Homing
Homing is performed as follows.
90
Press .
, the motor rotates continuously in a positive direction while pressing it.
, the motor rotates continuously in a negative direction while pressing it.
during rotation, the rotation speed changes to a jog speed (low).
+ , the motor rotates continuously in a positive direction while pressing it.
+ , the motor rotates continuously in a negative direction while pressing it.
during rotation, the rotation speed changes to a jog speed (high).
Press .
Press .
Homing
Movement completed.
To move to the next process, press
...A current position is shown during an operation.
Keep on pressing .
A dot ( ) moves to the left.
Error occurred
An error occurs if any
parameter related to
homing is not set.
.