Panasonic MINAS A4P Series Instruction Manual page 23

Mounting Direction and Spacing
• Reserve enough surrounding space for effective cooling.
• Install fans to provide uniform distribution of temperature in the control panel.
• Observe the environmental conditions of the control panel described in the next page.
Fan
40mm
or more
<Note>
It is recommended to use the conductive paint when you make your own mounting bracket, or repaint after
peeling off the paint on the machine for installing the products, in order to make noise countermeasure.
Caution on Installation
We have been making the best effort to ensure the highest quality, however, application of exceptionally
large external noise disturbance and static electricity, or failure in input power, wiring and components may
result in unexpected action. It is highly recommended that you make a fail-safe design and secure the safety
in the operative range.
There might be a chance of smoke generation due to the failure of these products. Pay an extra attention
when you apply these products in a clean room environment.
10mm 10mm
or or
more more
[Before Using the Products]
100mm
Fan
or more
40mm
10mm
or
or more
more
100mm
or more
23