Ipfilter - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

IPFILTER

7.3.1
Description: This command is used to query or edit IP filter table. The IP filter table
restricts the access of packets based on the IP header. If one or more IP addresses are
saved into the IP filter table, only clients whose IP is specified in the IP filter table can
access the PDS-220Fx.
Effect: Immediate
Command Arguments
ipfilter
ipfilter ADD ip1
ADD ip1 ip2
ipfilter DEL ip1
DEL ip1 ip2
ipfilter DEL #n
ipfilter DEL @
ipfilter SAVE
ipfilter LOAD
※ The IP filter table is loaded automatically when the PDS-220Fx is booted.
※ Use the "ipfilter save" command to save a new IP filter table to the EEPROM.
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
Description
Queries the IP filter table.
Adds an IP address to the IP filter table.
Adds a range of IP addresses (ip1 ~ ip2) to the IP filter table.
Deletes an IP address (ip1) from the IP filter table.
Deletes a range of IP addresses (ip1 ~ ip2) from the IP filter
table.
The IP address that follows the DEL command should already be
listed in the IP filter table.
Deletes item "n" from the IP filter table.
Deletes all items from the IP filter table.
Saves the IP filter table to the EEPROM. If the IP filter table is
empty, the data in EEPROM will be cleared.
Loads the IP filter table from the EEPROM.
59