Dhcp; Udp - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

DHCP

7.3.17
Description: This command is used to set the DHCP client to either enabled or disabled.
DHCP function will get a dynamic IP address setting for PDS-220Fx automatically. Thus
it's recommended to disable DHCP function and use a static IP address setting. This
prevents you to configure virtual COM mappings again and again.
Effect: Immediate
Command Arguments
DHCP = 0
DHCP = 1
Example:

UDP

7.3.18
Description: This command is used to configure the UDP Search function.
UDP is used to set the action mode for when a PDS-220Fx module receives a UDP search
command.
Effect: Immediate
Command Arguments
UDP = 0
UDP = 1
UDP = 2 (Default)
Example:
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
Description
Disables the DHCP client.
Enables the DHCP client.
Description
Rejects UDP search commands.
The PDS-220Fx will not reply to the UDP search command,
and can not be searched again.
Replies to UDP search commands.
The PDS-220Fx modules will reply to the UDP search
command, and can be searched.
Replies to UDP search commands till a client is connected.
70