ICP DAS USA PDS-220F Series User Manual page 42

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
The COM Port Settings area:
Device ID: Sets the device ID of PDS-220Fx module.
Port (COM0 for ALL Ports): Select the COM port by you used for PDS-220Fx
module.
Number of ID for serial Modbus device: Sets the device ID of serial Modbus
device. (0: Disable)
Timeout: If the PDS-220Fx module does not receive any data from RTU Slave for a
certain period, the PDS-220Fx module will return a timeout error to PC based on the
configured timeout value.
Type (0: ASCII, 1:RTU): Sets the Modbus type. (Modbus ASCII or Modbus RTU)
The more detailed information regarding Modbus Gateway applications settings, please
Section 6 "Modbus Testing and
refer to
Note: After configuring COM Port settings, please confirm that the "Save current
settings to EEPROM" and "Apply Current settings" items are checked, and then
click the "Update" button.
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
Protocol".
42