Appendix A: Linking To A Development Pc - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Appendix A: Linking to a Development PC

Step 1: Connect the download-cable, CA0910, between the PDS-220Fx series module
and COM 1 (or COM 2) of the development PC as per below the diagram.
Step 2: Switch the SW1 in the Init mode position.
Step 3: Unzip the "7188XW_yyyymmdd.zip" file on the PC.
The file is located in the CD:\Napdos\MiniOS7\utility folder.
http://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/
Step 4: Apply power (+Vs, GND) to the PDS-220Fx series module. The +Vs can be
anywhere from +12 ~ +48 V
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
.
DC
76