Regulate Init/Normal(Run) Mode - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

7.2 Regulate Init/Normal(Run) Mode


Comparison Sheet (Init/Run Modes)
Mode Firmware
Stop
Init
Init Mode is used to upgrade firmware and accepts MiniOS7
commands (from PDS.COM1) only.
Running
Run Mode is used for Virtual COM applications, and accepts
Run
Virtual COM commands (TCP port 10000) and Telnet commands
(TCP port 23).
Running
Console Mode is used to configure the Virtual COM.
Console
PDS.COM1 is the console port that accepts console commands
while other ports are still working with Virtual COM applications.
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
VCOM Telnet
Commands Commands
No No
Yes Yes
Yes Yes
Console
Commands
No
No
Yes
57