7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Figure 7-17: Pictorial Representation
7.11.4. Conversion Settings
7.11.4.1. Aspect Ratio Conversion
The Aspect Ratio Conversion menu is used to select the ARC processing that the card will perform in
response to the selected incoming AFD code.
Figure 7-18: Conversion Screen
There are numerous pre-defined aspect ratio conversions available, as well as the ability to define custom
aspect ratio conversions. When the User Aspect mode is selected, the user can set input image cropping
and output image size on a pixel-by-pixel and line-by-line basis. There are 10 user definable custom
aspect ratios available. See Section 7.10 for details on configuring custom user aspect ratios.
Page - 68
Revision 1.1.3