3.
SPECIFICATIONS
3.1.
SERIAL DIGITAL VIDEO INPUT
Standard:
Number of Inputs:
Connector:
Signal Level:
Input Equalization:
Return Loss:
3.2.
SERIAL DIGITAL VIDEO OUTPUT
Standard:
Number of Outputs:
Connector:
Signal Level:
SD Rise/Fall Times:
HD Rise/Fall Times:
Return Loss:
3.3.
REFERENCE VIDEO INPUT
Type:
Connector:
Termination:
*
References to 3G, SMPTE 424M/SMPTE 425 and single link 1080p59.94/50 refer 10 bit 4:2:2 1080p59.94/50 signals (Level A or B in SMPTE 425M)
References
to
dual
When set to output 372M dual link, PGM OUT1/2 are assigned for LINK A and PGM OUT3 is assigned to LINK B output.
Initial release will not support +CF option for 1080p59.94/50 output signals
270 Mb/sec SMPTE 259M
1.485 Gb/sec SMPTE 292M (1080i/720 @ 59.94 or 50 Hz)
2.970 Gb/sec SMPTE 425M* (-3G versions only)
2 (PGM A and PGM B)
DIN 1.0/2.3 CECC 22 230, DIN 47297 and DIN 41626
1V nominal
Automatic to 300m @ 270 Mbs with Belden 1694 or equivalent
Automatic to 100m @ 1.485 Gbs with Belden 1694 or equivalent
Automatic to 80m @ 2.970 Gbs with Belden 1694 or equivalent (-3G version
only)
> 15 dB to 1.5 GHz
> 10 dB to 3.0 GHz
270 Mb/sec SMPTE 259M
1.485 Gb/sec SMPTE 292M (1080i/720 59.94 or 50 Hz)
2.970 Gb/sec SMPTE 425M* (-3G versions only)
3
DIN 1.0/2.3 CECC 22 230, DIN 47297 and DIN 41626
800 mV nominal
740 ps nominal
200 ps nominal
> 15 dB to 1.5 GHz
> 10 dB to 3.0 GHz
HD Tri-Level sync, NTSC or PAL Colour Black 1 V p-p
DIN 1.0/2.3 CECC 22 230, DIN 47297 and DIN 41626
75 ohm
link
1080p59.94/50
refer
to
Revision 1.1.3
7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
SMPTE
372M
mapping
for
1080p59.94/50
4:2:2
10
bit
data
format
only.
Page - 17