Audio Monitor Settings; Audio Present Traps - evertz MultiFrame 7814 Series User Manual

7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters

7.14.2. Audio Monitor Settings

The Audio Monitor section enables the user to view video and audio parameters that are monitored.
This section is for read-only purposes and the parameters herein cannot be modified.
7.14.2.1. SRC Status
The SRC Status parameter displays the status of the Sample Rate Converters. The SRC status will
display either enable or bypass.
7.14.2.2. Audio Delay
The Audio Delay parameter displays the delay of the audio in ms.
7.14.2.3. Video Delay
The Video Delay parameter displays the delay of the associated video in ms.
7.14.2.4. Embedded Group 1 Input
The Embedded Group 1 Input parameter displays the presence of audio in group one.
7.14.2.5. Embedded Group 2 Input
The Embedded Group 2 Input parameter displays the presence of audio in group two.
7.14.2.6. Embedded Group 3 Input
The Embedded Group 3 Input parameter displays the presence of audio in group three.
7.14.2.7. Embedded Group 4 Input
The Embedded Group 4 Input parameter displays the presence of audio in group four.

7.14.3. Audio Present Traps

To enable a specific Fault trap, click the small box beside the relevant fault and ensure that a check mark
appears in the box. To disable a specific Fault trap, click the small box beside the relevant fault and
ensure that a check mark does not appear in the box.
Page - 80
Revision 1.1.3