6.4.
CHANGE PRODUCT TAB
Some options can be purchased from sales and added to the 7814 without hardware upgrades. This tab
allows for module upgrades that are purchased from sales.
6.4.1. Directly Set
6.4.1.1.
Serial Number
The serial number is loaded by the manufacturer and will be displayed in this location. When contacting
sales for an option upgrade you will need to quote this number.
6.4.1.2.
Product Name
The product name entry area is used to enter in the name of the product that the module will be upgrade
to. Please ask your sales rep for the proper product name when upgrading your module.
6.4.1.3.
Checksum
The check sum location will contain the verification code that the Evertz sales department will provide
when the options have been purchased.
NOTE: The Product name and the checksum NEED to be entered the exact same
way as provided by the Sales department or the process will not work.
6.4.2. Script Set
6.4.2.1.
Script File
When upgrading the 7814 cards a script file could be sent to the module to make the upgrade process
easier.
If using a script file for upgrading follow these steps:
1. Browse to the location of the file on your computer.
2. Press set to send the script file to the card
3. Once done restart the card for the settings to take effect.
7814 Series Dual HDTV Up/Down/Cross Converters
Figure 6-6: Change Product Tab
Revision 1.1.3
7800/7700 MultiFrame Manual
Page - 33