Embedded Audio Input Correction Tab; Channel X; Figure 7-24: Audio Input Correction Tab - evertz MultiFrame 7814 Series User Manual

7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters

7.15. EMBEDDED AUDIO INPUT CORRECTION TAB

The Embedded Audio Input Correction controls as shown in Figure 7-24 is used to configure parameters
associated with the embedded audio inputs. Audio input Correction is used to adjust the Gain, Inversion of
the individual audio input channels. Channels 1 to 8 can be configured by selecting the Channels 1-8
radial button and channels 9 to 16 can be configured by selecting the Channels 9-16 radial button. The
controls for Channel 1 will be described in detail, as the controls for Channels 1 - 16 operate in an
identical fashion. Sections 7.15.1 to 7.15.1.2 provide detailed information about each of the menu items.

Figure 7-24: Audio Input Correction Tab

7.15.1. Channel X

7.15.1.1. Input Gain Controls
The Gain control enables the user to set the value of the gain for the selected source. The user can adjust
the gain of the selected source by moving the associated slider control left to decrease the value or right
increase the value. The value range for the gain adjustments is -24 dB to +24 dB. Gain is adjusted in 0.1
dB increments.
7.15.1.2. Inversion Control
The Inversion control is used to invert the incoming audio channel.
Page - 81
Revision 1.1.3