Source Select Controls - evertz MultiFrame 7814 Series User Manual

7.24.1. Source Select Controls

The Source Select section enables the user to assign a particular channel to be used as a particular audio
source in the IntelliGain. There are sixteen sources of audio that feeds the IntelliGain process: Module 1,
channel 1 - 4, module 1, channel 5 – 8, Module 2 channel 1 – 4 and module 2 channel 5 – 8. Each of
these sources can be assigned a specific channel of audio using the appropriate drop down menu. For
sake of brevity, only Module 1 channel 1 selection process is shown.
7.24.1.1. Source X
The Source X control enables the user to route one of the 16 internally processed input audio channels to
the X input of the channel mixer. The user can select the channel source by selecting the desired
channels from the Source X drop down menu as shown below.
L Source X
Mute
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
AES 1.A
AES 1.B
AES 2.A
AES 2.B
AES 3.A
AES 3.B
AES 4.A
AES 4.B
AES 5.A
Revision 1.1.3
7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
AES 5.B
AES 6.A
AES 6.B
AES 7.A
AES 7.B
AES 8.A
AES 8.B
Mono mix channels 1 and 2
Mono mix channels 3 and 4
Mono mix channels 5 and 6
Mono mix channels 7 and 8
Mono mix channels 9 and 10
Mono mix channels 11 and 12
Mono mix channels 13 and 14
Mono mix channels 15 and 16
Down mix L
Down mix R
Down mix Mono
Up mix L
Up mix R
Up mix C
Up mix LFE
Up mix Ls
Up mix Rs
Up mix Pass L
Up Mix Pass R
Page - 111