6.
HIGH LEVEL CARD CONTROLS
To access high-level card controls, select the card from the navigation tree that you wish to configure (i.e.
7814UDX-AES8-3G-2) and right click using your mouse and select "View Configuration". The following six
control tabs will appear.
6.1.
GENERAL CONTROL TAB
The VLPRO interface for configuring the GENERAL control tab appears as follows:
To enable a specific Fault trap, click the small box beside the relevant fault and ensure that a check mark
appears in the box. To disable a specific Fault trap, click the small box beside the relevant fault and
ensure that a check mark does not appear in the box.
Figure 6-1: High Level Card Controls
Figure 6-2: Misc Faults Tab
Revision 1.1.3
7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Page - 27