7.17. EMBEDDED AUDIO MIXER TAB
As shown in Figure 7-26, there are sixteen individual Output Channel Mixers in the 7814 series modules.
These Output Channel mixers perform audio inversion, audio gain adjustment and audio channel
swapping for each of the 16 output audio channels. Using the X and Y inputs of each Output Channel
Mixer an additional level of mono mixing is also available for each channel of output audio.
For the sake of brevity, only the Audio Proc Ch1-Ch4 control tab will be discussed in this manual. Control
radial buttons for Channel 5-8, Channel 9-12, and Channel 13-16 are identical in their operation. The
controls for Channel 1 will be described in detail, as the controls for Channel 2, Channel 3 and Channel 4
operate in an identical fashion.
Note: Each group of controls contained in each one of the radial buttons is refreshed
every time a new radial button is selected. Once all the controls have been configured,
the controls must be applied in VLPro before continuing to a new radial tab or changes
will be lost.
Figure 7-26: Audio Proc Ch1-Ch4 Tab
Revision 1.1.3
7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Page - 83