Diagnostics Via Ethercat; Diagnostic History; Table 61 Led States Ethernet Status; Table 62 Led States - WAGO 765-1205/0100-0000 Manual

765-1205/0100-0000
LED
–
LED State
Flickering
(load-dependent)
Bluetooth
The Bluetooth
tion status.
LED
BT
Port Status
LEDs 0 (port X01), 1 (port X02), ..., 7 (port X08) indicate the status of the digital input/out-
put module.
LED
0, 1, 2, ...
Port Status
(pin 4)

11.2 Diagnostics via EtherCAT

11.2.1 Diagnostic History

Subindex Name
0
Product manual | Version: 1.0.0
8DIO FLD EC DC 24V 2.0A
Color
Green
Green
Off
LED yellow
Off
Definition
The indicator switches on and off at a frequency of 10 Hz, indicating high ETHERNET
activity:
on for 50 ms and then off for 50 ms.
The indicator switches on and off at irregular intervals to indicate low ETHERNET activ-
ity.
®
Status
®
LED is integrated into the Bluetooth
Color
Duo LED, blue/red
Blue
Off
Color
Duo LED, yellow/red (yellow = simultaneously red and green)
yellow
Off
red
red
Explanation
Highest supported Highest supported subindex
subindex
State Description
On Link: The module has a connection to the
ETHERNET, but is not sending/receiving
Ethernet frames.
Flickering (load-de- Activity: The module has a connection to
pendent) ETHERNET and is sending/receiving Ether-
net frames.
Off The module is not connected to the ETH-
ERNET.
Off This LED is not used.
Table 61: LED States ETHERNET Status
®
antenna and indicates the connec-
State Description
On Bluetooth
Off Bluetooth
State Description
On Status of digital input/output: 1
Off Status of digital input/output: 0
On Overload, short circuit (pin 4 and pin 3)
Flashing 1 Hz Overload, sensor supply short circuit (pin 1
and pin 3)
Table 64: Diagnostic History (Index 0x10F3)
Diagnostics
Table 62: LED States
®
connection established
®
inactive
Table 63: Port Status
Type Flags Default
UINT8 RO
®
81