Overview Of This Manual - ABB OmniCore E10 Product Manual

Overview of this manual

About this manual
This manual contains instructions for:
Usage
This manual should be used during:
Who should read this manual?
This manual is intended for:
Prerequisites
A maintenance/repair/installation craftsman working with an ABB robot must:
Product manual scope
The manual covers all variants and designs of the OmniCore E10. Some variants
and designs may have been removed from the business offer and are no longer
available for purchase.
References
Document name
Product specification - OmniCore E line
Circuit diagram - OmniCore E10
Product manual - OmniCore E10
3HAC079399-001 Revision: C
• mechanical and electrical installation of the controller
• maintenance of the controller
• mechanical and electrical repair of the controller
• installation and commissioning, from lifting the product to its work site and
securing it to the foundation, to making it ready for operation
• maintenance work
• repair work
• decommissioning work
Note
It is the responsibility of the integrator to conduct a risk assessment of the final
application.
It is the responsibility of the integrator to provide safety and user guides for the
robot system.
• installation personnel
• maintenance personnel
• repair personnel.
• be trained by ABB and have the required knowledge of mechanical and
electrical installation/repair/maintenance work.
• be trained to respond to emergencies or abnormal situations.
© Copyright 2019-2022 ABB. All rights reserved.
Overview of this manual
Document ID
3HAC079823-001
3HAC076810-008
Continues on next page
9