Network Security - ABB OmniCore E10 Product Manual

2.6 Network security

Network security
This product is designed to be connected to and to communicate information and
data via a network interface. It is your sole responsibility to provide, and
continuously ensure, a secure connection between the product and to your network
or any other network (as the case may be).
You shall establish and maintain any appropriate measures (such as, but not limited
to, the installation of firewalls, application of authentication measures, encryption
of data, installation of anti-virus programs, etc) to protect the product, the network,
its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB
Ltd and its entities are not liable for damage and/or loss related to such security
breaches, any unauthorized access, interference, intrusion, leakage and/or theft
of data or information.
Product manual - OmniCore E10
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
2 Controller description
2.6 Network security
43