Replacing The Power Unit - ABB OmniCore E10 Product Manual

5 Repair

5.2.3 Replacing the power unit

5.2.3 Replacing the power unit
Location
The illustration shows the location of the power unit in the controller.
xx2100001324
Required spare parts
Spare part
Power unit
Harness Signal cable assembly
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Continues on next page
128
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
Article number Note
3HAC074985-001 DSQC3087
3HAC078253-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Product manual - OmniCore E10
202.
3HAC079399-001 Revision: C