Replacing The Small Fans - ABB OmniCore E10 Product Manual

5 Repair

5.2.2.1 Replacing the small fans

5.2.2.1 Replacing the small fans
Removing the small fan
Preparations
1
2
3
Removing the small fan
1
Continues on next page
124
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 41.
Remove the top cover of the controller.
Action
Disconnect:
• G1/G2.X1
© Copyright 2019-2022 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2100001295
Removing the controller top cover on
page 120.
Note/Illustration
xx2100001330
Product manual - OmniCore E10
3HAC079399-001 Revision: C