Environmental Information - ABB OmniCore E10 Product Manual

7 Decommissioning

7.2 Environmental information

7.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Material
Aluminium
Batteries, Lithium
Brominated flame retardants
Copper
Lead
Plastic/rubber
Steel
Continues on next page
196
Example application
Heat sinks on power unit and drive unit
Computer and logic unit
Electronics
Cables
Electronics
Cables, connectors, etc.
Cabinet structure, plates, screws, etc.
© Copyright 2019-2022 ABB. All rights reserved.
Product manual - OmniCore E10
3HAC079399-001 Revision: C