Inspection Activities; Inspection Of Controller - ABB OmniCore E10 Product Manual

4 Maintenance

4.2.1 Inspection of controller

4.2 Inspection activities

4.2.1 Inspection of controller
Inspecting the OmniCore E10 controller
1
2
3
4
5
106
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 41.
Inspect connectors and cabling to make
sure they are securely fastened and
cabling not damaged.
Inspect the fans and ventilation holes to
make sure they are clean.
After inspection: Temporarily turn the
power supply on. Inspect the fans to
make sure they function correctly. Switch
the power off.
© Copyright 2019-2022 ABB. All rights reserved.
Note/illustration
Location of wrist strap button:
xx2100001295
Product manual - OmniCore E10
3HAC079399-001 Revision: C