Replacing The Computer And Logic Unit - ABB OmniCore E10 Product Manual

5.2.5 Replacing the computer and logic unit

Location
The illustration shows the location of the computer and logic unit in the controller.
xx2100001325
Required spare parts
Spare part
Computer and logic unit
Harness Signal cable assembly
Required tools and equipment
Product manual - OmniCore E10
3HAC079399-001 Revision: C
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
Note
For robots with the controller delivered to start in automatic mode, a FlexPendant
is required after the replacement to be able to change to automatic mode.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.5 Replacing the computer and logic unit
Article number Note
3HAC074970-001 DSQC3090
3HAC078253-001
5 Repair
Continues on next page
141