74
Commissioning
7.2.2.2
PROFIBUS DP Fieldbus Couplers 750-333/040-000
The aforementioned fieldbus couplers allow channel-specific parameterization of
behavior at diagnosis.
Table 46: General Module/Channel Parameters
Parameter
Diagnosis
Channel x (x = 0...3)
*)
Default setting
Manual
Version 1.0.2
Value
Explanation
The fieldbus coupler signals a diagnosis, if at least
one channel of the I/O module reports the following
events:
- Measurement range overflow
- Measurement range underflow
- Overload
- Wire break
0 (disabled)
*)
Diagnostics reported by the I/O module do not lead to
the signaling of a diagnosis by the fieldbus coupler.
1 (enabled)
Diagnostics reported by the I/O module lead to the
signaling of a diagnosis by the fieldbus coupler.
WAGO I/O System 750 XTR
750-471/040-000 4AI U/I Diff Galv XTR