Cage Clamp ® Connectors; Figure 4: Cage Clamp ® Connectors; Table 6: Legend For Figure "Cage Clamp ® Connectors - WAGO 750 XTR Manual

24 Device Description
3.2.3 CAGE CLAMP
Figure 4: CAGE CLAMP
Table 6: Legend for Figure "CAGE CLAMP
Channel
1
2
3
4
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Shield Connection System for Electromagnetic Compatibility!
The WAGO Shield Connection System offers a full range of accessories for
maintaining electromagnetic compatibility (EMC)! Related information is available
at www.wago.com.
Manual
Version 1.0.2
® Connectors
® Connectors
® Connectors"
Designation Connection
+AI 1
−AI 1
+AI 2
−AI 2
+AI 3
−AI 3
+AI 4
−AI 4
WAGO I/O System 750 XTR
750-471/040-000 4AI U/I Diff Galv XTR
Function
1 + Current signal, voltage signal
5 − Current signal, voltage signal
2 + Current signal, voltage signal
6 − Current signal, voltage signal
3 + Current signal, voltage signal
7 − Current signal, voltage signal
4 + Current signal, voltage signal
8 − Current signal, voltage signal