Table 49: Behavior In The Event Of An I/O Module Error Dependent On The - WAGO 750 XTR Manual

WAGO I/O System 750 XTR
750-471/040-000 4AI U/I Diff Galv XTR
Table 49: Behavior in the Event of an I/O Module Error Dependent on the Configuration
Configuration
Wire break/ /
overload
monitoring*
OFF
OFF
ON
ON
*The monitoring must be activated separately or deactivated
The limiting values for detecting an underrange / overrange, a wire break or an
overload and the output process values are specified in the process image tables
(see section "Process Image").
A general error signals a diagnosed error status. A general error is displayed if
one of the error statuses named in this section occur. If there are any of the
diagnostics for range violation, overload or wire break, the bit for general error is
always set.
I/O module behavior
Underrange/
for wire break/
overrange
overload
monitoring
Process value is
saturated,
OFF no change in statues
byte,
error LED off
Process value is
saturated,
(bit 0: Underrange or bit
1: Overrange /
ON
Overload) is set,
general error (bit 6:
General Error) is set,
error LED ON
Process value is
saturated,
error bit (bit 4: Overload
OFF or bit 5: Wire break) is
set, general error (bit 6:
General Error) is set,
error LED ON
Process value is
saturated,
error bit (bit 4: Overload
or bit 5: Wire break) is
ON
set, general error (bit 6:
General Error) is set,
error LED ON
Diagnostics 77
I/O module behavior
for range violation
Process value is
saturated,
no change in statues
byte,
error LED off
Process value is
saturated,
error bit (bit 0:
Underrange or bit 1:
Overrange) is set,
general error (bit 6:
General Error) is set,
error LED ON
Process value is
saturated,
no change in statues
byte,
error LED off
Process value is
saturated,
error bit (bit 0:
Underrange or bit 1:
Overrange) is set,
general error (bit 6:
General Error) is set,
error LED ON
Manual
Version 1.0.2