Fire-Lite Alarms MS-9200 Technical Manual page 62

3.3.04 3.3.04 Set Time/Date 3.3.04 3.3.04 3.3.04 Set Time/Date Set Time/Date Set Time/Date Set Time/Date
If '4' is pressed, the following is displayed:
The first digit of the hours is flashing and may be changed with the numeric pad. The RIGHT CURSOR moves to
the next digit and the UP/DOWN cursor selects (A)M or (P)M and day of the week. Pressing the ENTER key
stores the time and date and returns to the level 2 main screen.
3.3.05 3.3.05 Check Check
3.3.05 3.3.05 3.3.05 Check Check Check
Program selection '5' performs a check on software zone assignments. The MS-9200 looks for output devices
assigned to a software zone that does not contain any input devices (detectors, monitor modules). If multiple
devices fail the check, the UP/DOWN keys are used to step through the list of devices. The user must return to
point editing to correct any errors.
NOTE: The system continues monitoring alarm conditions during all Programming and Read Status operations
with theexception of Walktest.
At the completion of system programming, Switch SW1 (Write Protect switch) should be set to the Write Protect
position to prevent inadvertent changes to programmed features. Slide the switch to the up position to select the
Write Protect feature. See Figure 2.23 for the location of SW1.
62
Technical Manuals Online! - http://www.tech-man.com
CHANGE TIME/DATE
10:00 A MON 03/04/96
Document # 50428 Rev. B1 7/28/97
firealarmresources.com
P/N 50428:B1