3.1 Programming
3.1 Programming
3.1 Programming
3.1 Programming
3.1 Programming
Press the ENTER key. The screen below will appear:
To enter the programming mode, press '1'. The display will read as follows:
Entering the Level 1 password (default 00000) will cause the following screen to appear: (Refer to Section 3.2)
Entering the Level 2 password (default 11111) will cause the following screen to appear: (Refer to Section 3.3)
Technical Manuals Online! - http://www.tech-man.com
1=PROGRAMMING
2=RD STATUS 3=AC/BAT
KEY IN 5 DIGIT
PASSWORD, THEN ENTER
0=CLR 1=AUTO 2=POINT
3=SYS 4=PWORD 5=LOAD
1=DISABL 2=CLR HIST
3=WALK 4=TIME 5=CHEK
Document # 50428
Rev. B1
7/28/97
firealarmresources.com
P/N 50428:B1
51