3.2.06
3.2.06
3.2.06
3.2.06
3.2.06
LOAD
LOAD
LOAD
LOAD
LOAD
While displaying the Program Menu, program selection '5' sets up the MS-9200 for transfer of its application
database from/to a DOS-based computer. This may be used to save the program that exists in an MS-9200 for
security and future service reasons; or may be used to transfer a program created off-line to the MS-9200. Refer
to Document# 15677 for more information. When the Load option is selected, the following screen will be dis-
played:
The LEFT CURSOR may be used to return to the program change screen. The PC connects to the EIA-232 printer
interface (instructions provided with the Upload/Download software kit). Continue to press the Backspace key (left
cursor) to return to the main program screen.
3.3
3.3
3.3
Prog
Prog
Progr r r r r am Change - Le
am Change - Lev v v v v el el el el el T T T T T w w w w w o o o o o
am Change - Le
am Change - Le
3.3
3.3
Prog
Prog
am Change - Le
While the MS-9200 system is normal with no active alarms, troubles or supervisories, the screen shown below
will be displayed:
To access the programming mode, the ENTER key must be pressed. After pressing ENTER, the following
screen is displayed:
Pressing '1' will cause the following screen to appear:
Technical Manuals Online! - http://www.tech-man.com
CONNECT COMPUTER NOW
RUN PROGRAM FROM PC
SYSTEMS ALL NORMAL
10:00 A MON 03/04/96
1=PROGRAMMING
2=RD STATUS 3=AC/BAT
KEY IN 5 DIGIT
PASSWORD,THEN ENTER
Document # 50428
Rev. B1
7/28/97
firealarmresources.com
P/N 50428:B1
59