Fire-Lite Alarms MS-9200 Technical Manual page 12

Addressable fire control panel (export version)
Table of Contents

Advertisement

4
4
5
5
3
3
6
6
2
7
2
7
1
8
1
8
0
9
0
9
12
Technical Manuals Online! - http://www.tech-man.com
Addressable Devices: Modules (continued)
Addressable Devices: Modules (continued)
Addressable Devices: Modules (continued)
Addressable Devices: Modules (continued)
Addressable Devices: Modules (continued)
C304
C304
C304
C304
C304
Addressable Control Module
Addressable Control Module
The C304 is an Addressable Control Module
Addressable Control Module
Addressable Control Module that can be used as a Notification Appliance
or Speaker Circuit for powering and supervising compatible, UL listed Notification Appli-
ances. The module's supervised circuit can be wired NFPA Style W, X, Y or Z. A 47 K
ELR is provided. By breaking two built-in tabs, the C304 can be employed as a Form-C
control relay. The module mounts to a 4-inch square electrical box with a minimum depth
of 2-1/8".
BG-10LX
BG-10LX
BG-10LX
BG-10LX
BG-10LX
The BG-10LX is an Addressable Manual Pull Station
Addressable Manual Pull Station featuring a key-lock reset. The pull
Addressable Manual Pull Station
Addressable Manual Pull Station
Addressable Manual Pull Station
station responds to an address set by the installer using the built-in rotary decimal
switches on the pull station. The Manual Pull Station includes a Fire•Lite key.
I300
I300
I300
I300
I300
Loop Isolator Module
Loop Isolator Module
The Loop Isolator Module
Loop Isolator Module (I300) is an automatic switch which opens the circuit voltage
Loop Isolator Module
to the SLC Loop branch(es) whenever a wire-to-wire short circuit is detected on that loop.
The remainder of the Communications Loop leading up to the I300 will continue to oper-
ate, unaffected by the short. The isolator module has four terminal connections, allowing
input and output SLC connections. The isolator is bi-directional, meaning that it can
detect a fault condition between the input SLC terminals, or output SLC terminals. The
I300 is required to meet NFPA Style 7 requirements.
Addressable Device Accessories
Addressable Device Accessories
Addressable Device Accessories
Addressable Device Accessories
Addressable Device Accessories
E.O.L. RESISTOR FIRE•LITE P/N R-47K
E.O.L. RESISTOR FIRE•LITE P/N R-47K
E.O.L. RESISTOR FIRE•LITE P/N R-47K
E.O.L. RESISTOR FIRE•LITE P/N R-47K
E.O.L. RESISTOR FIRE•LITE P/N R-47K
The 47K End-Of-Line Resistor Assembly
47K End-Of-Line Resistor Assembly is used to supervise the M300 Monitor and
47K End-Of-Line Resistor Assembly
47K End-Of-Line Resistor Assembly
47K End-Of-Line Resistor Assembly
C304 Control Module circuits. The resistor is included with each M300 and C304 module.
A UL listed End-Of-Line Power Supervision Relay
End-Of-Line Power Supervision Relay
End-Of-Line Power Supervision Relay is used to supervise the power to 4-
End-Of-Line Power Supervision Relay
End-Of-Line Power Supervision Relay
wire smoke detectors and Notification Appliances.
N-ELR
N-ELR
N-ELR
N-ELR
N-ELR
The N-ELR
N-ELR
N-ELR
N-ELR is a single End-of-Line Resistor plate which is required for use in Canada.
N-ELR
An ELR, which is supplied with each module and fire alarm control panel, must be
mounted to the plate. Resistors mounted to the N-ELR plate can be used for the supervi-
sion of an M300 and M301 Monitor Module and C304 Control Module circuit.
Document # 50428
firealarmresources.com
Rev. B1
7/28/97
P/N 50428:B1

Advertisement

Table of Contents
loading

Table of Contents