Set Time; Date; Timer - ProMinent Sigma X Operating Instructions Manual

'Menu'
Set up/
'Bluetooth '
9.3.5.1
'Volume unit'
9.3.5.2

'Set time'

9.3.6

'Date'

9.3.7

'Timer'

9.4
54
'System' menu splits into the following sub-menus:
The
'Bluetooth'
1 -
'Volume unit'
2 -
'Menu / Information è Settings è System è Bluetooth è ...'
You can switch the pump's Bluetooth communication on and off in the
'Bluetooth' sub-menu. The blue "Bluetooth active" LED lights up on the
HMI.
'Menu / Information è Settings è System è Volume unit è ...'
You can select another unit for the volume in the
'Menu / Information è Settings è Set time è ...'
You can set the time in the
1. Use the dial to adjust a figure.
[Priming] to move to the next figure.
2. Use
'Auto. Summertime' you can select whether you wish to change
Under
'Summertime' .
over to
You can also state when the pump is to change to and from
'Summertime' .
'Location' whether the pump is also set to your
Check under
'hemisphere' of the world.
'Menu / Information è Settings è Date è ...'
You can set the date in the
'Menu / Information è Timer è ...'
The process timer can do the following to the pump at a predefined time:
start
n
stop
n
change operating mode
n
open the relay (with "CTRL software" higher than 01.01.03.01)
n
close the relay (with "CTRL software" higher than 01.01.03.01)
n
'Volume unit' sub-menu.
'Set time' menu.
'Date' menu.