ProMinent Sigma X Operating Instructions Manual page 34

Installation
Fault indicating relay (24 V)
Pacing relay
Fault indicating and pacing relay
2
Fig. 23: Pin assignment on the pump
Tab. 3: Pin assignment
To pin VDE cable
1 yellow
4 green
3 white
2 brown
7.2.2.1.3 Current output and fault indicating / pacing relay (24 V)
34
Data
Maximum contact load at 24 V and 50/60
Hz:
Minimum mechanical service life:
Data
Residual voltage max. at I
Maximum current
Maximum voltage
Closing time
3
1
4
P_SI_0111_SW
Contact
NC (normally closed) or
NO (normally open)
C (common)
NC (normally closed) or
NO (normally open)
C (common)
The module can be retrofitted and operates once it has been inserted into
the module board.
The variable to be signalled for the current output can be selected in the
'ANALOGUE OUTPUT' menu.
If another switching function is required, the relay can be reprogrammed in
'Relay' menu.
the
200,000 switching
= 1 µA
off max
Relays
Fault indicating relay
Fault indicating relay
Pacing relay
Pacing relay
Value Unit
100 mA
operations
Value Unit
0.4 V
100 mA
24 V DC
100 ms