Qualification Of Personnel - ProMinent Sigma X Operating Instructions Manual

Diaphragm motor-driven metering pump
Hide thumbs Also See for Sigma X:
Table of Contents

Advertisement

Safety chapter

2.3 Qualification of personnel

Task
Storage, transport, unpacking
Assembly
Planning the hydraulic installation
Hydraulic installation
Electrical installation
Operation
Maintenance, repair
Decommissioning, disposal
Troubleshooting
10
The pump is not intended for operation in areas at risk from explosion.
n
The pump is not intended for unprotected use outdoors.
n
The pump is only intended for industrial use.
n
Only allow the pump to be operated by trained and authorised per‐
n
sonnel - see the following "Qualifications" table.
You have a duty to observe the information contained in the operating
n
instructions during the different phases of the unit's service life.
Qualification
Instructed person
Technical personnel, service
Qualified personnel with a thorough knowledge of oscillating dis‐
placement pumps
Technical personnel, service
Electrical technician
Instructed person
Technical personnel, service
Technical personnel, service
Technical personnel, electrical technician, instructed person,
service
Explanation of the table:
Technical personnel
Technical personnel are deemed to be people who are able to assess the
tasks assigned to them and recognise possible dangers based on their
technical training, knowledge and experience, as well as knowledge of
pertinent regulations.
Note: A qualification of equal validity to a technical qualification can also
be gained by several years of employment in the relevant field of work.
Electrical technician
An electrical technician is able to complete work on electrical systems and
recognise and avoid possible dangers independently based on their tech‐
nical training and experience as well as knowledge of pertinent standards
and regulations.
The electrical technician must be specifically trained for the working envi‐
ronment in which they are employed and be conversant with the relevant
standards and regulations.
The electrical technician must comply with the provisions of the applicable
statutory directives on accident prevention.
Instructed person
An instructed person is deemed to be a person who has been instructed
and, if required, trained in the tasks assigned to them and possible dan‐
gers that could result from improper behaviour as well as having been
instructed in the required protective equipment and protective measures.
Service
Service refers to service technicians, who have received proven training
and have been authorised by ProMinent or ProMaqua to work on the
system.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sigma 2 - s2cbSigma x s2cbSigma/2Sigma/s2cb

Table of Contents