Events In The Log Book - ProMinent Sigma X Operating Instructions Manual

Troubleshooting
Message no. Description
53 Error in the intermediate circuit voltage
54 The 5 V at the DFM input has short circuited
55 An optional module was inserted into the pump, which cannot be used.
56 Subscriber software is incompatible with the other subscribers
57 The pump is blocked and is not running
58 Missing or defective hall sensor
59 Shut-down in the event of overpressure, slow
60 Shut-down in the event of overpressure, fast
- Missing data stored in the CTRL in the HMI
- The data coming from the CTRL is faulty
14.6.3

Events in the log book

80
Message no. Description
4 The stroke length was adjusted by more than 5%
8 Calibration was performed
9 The pump was started or stopped by the HMI
13 The timer has performed a timer program step