ProMinent Sigma X Operating Instructions Manual page 46

'Menu'
Set up/
Memory - Pulses not yet processed
Factor
46
'Memory' function extension ("memory" identi‐
You can also activate the
fier ). When 'Memory' is activated, the pump adds up the remaining
strokes , which could not be processed, up to the maximum capacity of the
stroke memory of 99,999 strokes. If this maximum capacity is exceeded,
the pump goes into fault mode.
CAUTION!
'Memory' - 'off' : If you press
– Only with
[STOP/START] or empty the contact memory
'Menu / Information è Service è Clear counters' )
(
or the "Pause" function is activated, the
cleared.
The number of strokes per pulse depends on the factor which you can
input. By using a factor you can multiply incoming pulses by a factor
between 1.01 and 99.99 or reduce them by a factor of 0.01 to 0.99:
Number of strokes executed = factor x number of
incoming pulses
'Memory' is