'Menu'
Set up /
12.2.6.1
Volume unit
'Set time'
12.2.7
'Date'
12.2.8
'Tube Service'
12.3
12.4
Timer
56
'Menu / Information è Settings è System è Volume unit è ...'
You can select another unit for the volume in the
'Menu / Information è Settings è Set time è ...'
You can set the time in the
1.
Use the dial to adjust a figure.
[Priming] to move to the next figure.
2.
Use
'Auto. Summertime' you can select whether you wish to change
Under
'Summertime' .
over to
You can also state when the pump is to change to and from
'Summertime' .
'Location' whether the pump is also set to your
Check under
'hemisphere' of the world.
'Menu / Information è Settings è Date è ...'
You can set the date in the
'Menu / Information è Service è Hose change è ...'
This menu only appears once a manual stop has been performed using
[STOP/START] .
Here you can replace a hose following the guidance provided. For the
Ä Chapter 14.1 'Replacing the pump hose'
detailed description - see
on page 77 .
'Menu / Information è Timer è ...'
Please first read this chapter to gain an overview.
–
You will then understand the timer better when
working through the chapter.
The timer DULCO flex Control - DFYa can do the following at predefined
times and intervals or event-dependent:
open / close the relays
n
start a delayer
n
switch operating mode
n
'Volume unit' sub-menu.
'Set time' menu.
'Date' menu.